Door lock & handle repairs in Leeds.

Handle won't lift, key won't turn, door won't lock. Usually a worn gearbox, cylinder or handle that can be replaced.

  • Free to ask, no obligation
  • One fitter, not a ring-round
  • Call back at a time you choose

Most uPVC and composite doors use a multipoint lock: a long strip inside the edge of the door with a central gearbox, operated by lifting the handle and turning the key. When one part wears or breaks, the whole door can refuse to lock, or worse, refuse to open.

Common lock faults

  • Handle feels loose or floppy: the handle spring or the gearbox has failed.
  • Handle won't lift to engage the locks: often the door has dropped and the hooks or rollers are hitting the keeps. Adjustment may fix it. See door adjustment.
  • Key is stiff or won't turn: a worn cylinder or a mechanism under strain.
  • Door locked shut and won't open: a broken gearbox. A fitter can open the door and replace the mechanism.

Upgrade the cylinder while you're at it

Older doors often have basic euro cylinders that can be snapped in seconds. An anti-snap cylinder rated TS 007 3 star or SS312 Diamond is a small, inexpensive upgrade that makes a big difference to security, and it can usually be fitted at the same visit.

Tip

Take a photo of the faceplate on the edge of the door. The brand name and the measurements stamped on it help the fitter bring the right replacement mechanism.

FAQs

Common questions.

Short answers to what people usually ask first.

Can a multipoint lock be repaired or does it need replacing?

Usually the gearbox or the whole strip is replaced. Parts for most common systems are readily available.

My door is locked and won't open. What do I do?

Don't force the handle. Request a callback and explain the problem. The fitter can open the door and fit a new mechanism.

Should I replace the lock or the whole door?

If the door itself is in good condition, a new lock is far cheaper. If the door is warped, draughty or damaged, replacement may be better value.

Request a callback

Tell us about the job.

Two quick steps. Only your name, phone and postcode are needed.

What happens next

Your request goes straight to one local fitter by email. Nobody else sees it.

Step 1
Your request lands with the fitter straight away
Step 2
They call you back, at the time you pick where they can
Step 3
If it's a fit, they visit to measure up and quote
Cost
Free to ask, no obligation to go ahead
What do you need?

Pick the closest match.

Your details

So the fitter can call you back.

Free to ask. No obligation to go ahead.

Request a callback