Misted window repairs in Leeds.

Condensation between the panes means the seal on the glass unit has failed. In most cases you only need a new unit, not a new window.

  • Free to ask, no obligation
  • One fitter, not a ring-round
  • Call back at a time you choose

A double-glazed window is two panes of glass sealed around a spacer, with dry air or gas in between. When that seal fails, moist air gets in and condenses on the inside of the panes. You can't wipe it away, and it usually gets worse over time.

Is it the glass or the frame?

  • Condensation between the panes that you can't reach: the sealed unit has failed. Replace the glass unit.
  • Condensation on the inside of the room-side pane: this is a ventilation or humidity issue, not a failed unit. Open trickle vents and improve airflow.
  • Condensation on the outside on cold mornings: a sign of a well-insulated unit, not a fault.

What a glass unit replacement involves

The fitter measures the existing unit, orders a new one made to size, then comes back to remove the beads, take out the old unit and fit the new one in the same frame. Each unit usually takes well under an hour to fit once it arrives.

When to replace the window instead

If the frame is warped, rotten or the hinges and locks are failing too, or if several windows are misting at once, it can be better value to replace the whole window. Our repair or replace guide covers this in more detail.

Tip

Look at the metal spacer bar between the panes. There may be a date and manufacturer stamped on it. A photo of that helps the fitter, and tells you how old the unit is.

FAQs

Common questions.

Short answers to what people usually ask first.

Can misted double glazing be cleared without replacing it?

Some companies offer to drill and dry the unit, but it does not restore the seal or the insulating gas. Replacing the unit is the reliable fix.

Do I need a certificate for a new glass unit?

No. Replacing just the glass is a repair, not controlled work under Building Regulations.

Will a new unit match the others?

The fitter will match thickness, spacer colour and any glazing bars or obscure glass as closely as possible.

Request a callback

Tell us about the job.

Two quick steps. Only your name, phone and postcode are needed.

What happens next

Your request goes straight to one local fitter by email. Nobody else sees it.

Step 1
Your request lands with the fitter straight away
Step 2
They call you back, at the time you pick where they can
Step 3
If it's a fit, they visit to measure up and quote
Cost
Free to ask, no obligation to go ahead
What do you need?

Pick the closest match.

Your details

So the fitter can call you back.

Free to ask. No obligation to go ahead.

Request a callback